mirror of https://github.com/SnapKit/SnapKit
282 lines
9.5 KiB
Markdown
282 lines
9.5 KiB
Markdown
# Snappy
|
||
|
||
Snappy is a light-weight layout framework which wraps AutoLayout with a nicer syntax. Snappy has its own layout DSL which provides a chainable way of describing your NSLayoutConstraints which results in layout code that is more concise and readable. Snappy supports both iOS and OS X.
|
||
|
||
> Snappy uses some Swift-only features like function overloading, so it cannot be used from Objective-C. Because of this we’ve chosen to swap prefixes from Masonry’s `mas_` to `snp_` so you can use both Masonry and Snappy in the same project.
|
||
|
||
## Requirements
|
||
|
||
## Installation
|
||
|
||
_Due to the current lack of [proper infrastructure](http://cocoapods.org) for Swift dependency management, using Snappy in your project requires the following steps:_
|
||
|
||
1. Add Snappy as a [submodule](http://git-scm.com/docs/git-submodule) by opening the Terminal, `cd`-ing into your top-level project directory, and entering the command `git submodule add https://github.com/Masonry/Snappy.git`
|
||
2. Open the `Snappy` folder, and drag `Snappy.xcodeproj` into the file navigator of your Xcode project<sup>1</sup>.
|
||
3. In Xcode, navigate to the target configuration window by clicking on the blue project icon, and selecting the application target under the "Targets" heading in the sidebar.
|
||
4. In the tab bar at the top of that window, open the "General" panel.
|
||
5. Click on the `+` button in the "Embedded Binaries" group of the panel and select and add `Snappy.framework`.
|
||
|
||
<sup>1</sup><small>It's important you add Snappy as a subproject of your Xcode Project and not of a potential Xcode Workspace containing your project</small>
|
||
|
||
|
||
## What's wrong with NSLayoutConstraints?
|
||
|
||
Under the hood Auto Layout is a powerful and flexible way of organising and laying out your views. However creating constraints from code is verbose and not very descriptive.
|
||
Imagine a simple example in which you want to have a view fill its superview but inset by 10 pixels on every side
|
||
```swift
|
||
let superview = self;
|
||
|
||
let view1 = UIView()
|
||
view1.setTranslatesAutoresizingMaskIntoConstraints(false)
|
||
view1.backgroundColor = UIColor.greenColor()
|
||
superview.addSubview(view1)
|
||
|
||
let padding = UIEdgeInsetsMake(10, 10, 10, 10)
|
||
|
||
superview.addConstraints([
|
||
NSLayoutConstraint(
|
||
item: view1,
|
||
attribute: NSLayoutAttribute.Top,
|
||
relatedBy: NSLayoutRelation.Equal,
|
||
toItem: superview,
|
||
attribute: NSLayoutAttribute.Top,
|
||
multiplier: 1.0,
|
||
constant: padding.top
|
||
),
|
||
NSLayoutConstraint(
|
||
item: view1,
|
||
attribute: NSLayoutAttribute.Left,
|
||
relatedBy: NSLayoutRelation.Equal,
|
||
toItem: superview,
|
||
attribute: NSLayoutAttribute.Left,
|
||
multiplier: 1.0,
|
||
constant: padding.left
|
||
),
|
||
NSLayoutConstraint(
|
||
item: view1,
|
||
attribute: NSLayoutAttribute.Bottom,
|
||
relatedBy: NSLayoutRelation.Equal,
|
||
toItem: superview,
|
||
attribute: NSLayoutAttribute.Bottom,
|
||
multiplier: 1.0,
|
||
constant: -padding.bottom
|
||
),
|
||
NSLayoutConstraint(
|
||
item: view1,
|
||
attribute: NSLayoutAttribute.Right,
|
||
relatedBy: NSLayoutRelation.Equal,
|
||
toItem: superview,
|
||
attribute: NSLayoutAttribute.Right,
|
||
multiplier: 1.0,
|
||
constant: -padding.right
|
||
)
|
||
])
|
||
```
|
||
Even with such a simple example the code needed is quite verbose and quickly becomes unreadable when you have more than 2 or 3 views.
|
||
Another option is to use Visual Format Language (VFL), which is a bit less long winded.
|
||
However the ASCII type syntax has its own pitfalls and its also a bit harder to animate as `NSLayoutConstraint.constraintsWithVisualFormat` returns an array.
|
||
|
||
## Prepare to meet your Maker!
|
||
|
||
Heres the same constraints created using ConstraintMaker
|
||
|
||
```swift
|
||
let padding = UIEdgeInsetsMake(10, 10, 10, 10)
|
||
|
||
view1.snp_makeConstraints { make in
|
||
make.top.equalTo(superview.snp_top).with.offset(padding.top) // with is an optional semantic filler
|
||
make.left.equalTo(superview.snp_left).with.offset(padding.left)
|
||
make.bottom.equalTo(superview.snp_bottom).with.offset(-padding.bottom)
|
||
make.right.equalTo(superview.snp_right).with.offset(-padding.right)
|
||
}
|
||
```
|
||
Or even shorter
|
||
|
||
```swift
|
||
view1.snp_makeConstraints { make in
|
||
make.edges.equalTo(superview).with.insets(padding)
|
||
return // this return is a fix for implicit returns in Swift and is only required for single line constraints
|
||
}
|
||
```
|
||
|
||
Also note in the first example we had to add the constraints to the superview `superview.addConstraints`.
|
||
Snappy however will automagically add constraints to the appropriate view.
|
||
|
||
Snappy will also call `view1.setTranslatesAutoresizingMaskIntoConstraints(false)` for you.
|
||
|
||
## Not all things are created equal
|
||
|
||
> `.equalTo` equivalent to **NSLayoutRelation.Equal**
|
||
|
||
> `.lessThanOrEqualTo` equivalent to **NSLayoutRelation.LessThanOrEqual**
|
||
|
||
> `.greaterThanOrEqualTo` equivalent to **NSLayoutRelation.GreaterThanOrEqual**
|
||
|
||
These three equality constraints accept one argument which can be any of the following:
|
||
|
||
#### 1. ViewAttribute
|
||
|
||
```swift
|
||
make.centerX.lessThanOrEqualTo(view2.snp_left)
|
||
```
|
||
|
||
ViewAttribute | NSLayoutAttribute
|
||
------------------------- | --------------------------
|
||
view.snp_left | NSLayoutAttribute.Left
|
||
view.snp_right | NSLayoutAttribute.Right
|
||
view.snp_top | NSLayoutAttribute.Top
|
||
view.snp_bottom | NSLayoutAttribute.Bottom
|
||
view.snp_leading | NSLayoutAttribute.Leading
|
||
view.snp_trailing | NSLayoutAttribute.Trailing
|
||
view.snp_width | NSLayoutAttribute.Width
|
||
view.snp_height | NSLayoutAttribute.Height
|
||
view.snp_centerX | NSLayoutAttribute.CenterX
|
||
view.snp_centerY | NSLayoutAttribute.CenterY
|
||
view.snp_baseline | NSLayoutAttribute.Baseline
|
||
|
||
#### 2. UIView/NSView
|
||
|
||
if you want view.left to be greater than or equal to label.left :
|
||
```swift
|
||
// these two constraints are exactly the same
|
||
make.left.greaterThanOrEqualTo(label)
|
||
make.left.greaterThanOrEqualTo(label.snp_left)
|
||
```
|
||
|
||
#### 3. Strict Checks
|
||
|
||
Auto Layout allows width and height to be set to constant values.
|
||
if you want to set view to have a minimum and maximum width you could pass a primitive to the equality blocks:
|
||
```swift
|
||
// width >= 200 && width <= 400
|
||
make.width.greaterThanOrEqualTo(200)
|
||
make.width.lessThanOrEqualTo(400)
|
||
```
|
||
|
||
However Auto Layout does not allow alignment attributes such as left, right, centerY etc to be set to constant values.
|
||
So if you pass a primitive for these attributes Snappy will turn these into constraints relative to the view’s superview ie:
|
||
```swift
|
||
// creates view.left <= view.superview.left + 10
|
||
make.left.lessThanOrEqualTo(10)
|
||
```
|
||
|
||
You can also use other primitives and structs to build your constraints, like so:
|
||
```swift
|
||
make.top.equalTo(42)
|
||
make.height.equalTo(20)
|
||
make.size.equalTo(CGSizeMake(50, 100))
|
||
make.edges.equalTo(UIEdgeInsetsMake(10, 0, 10, 0))
|
||
make.left.equalTo(view).offset(UIEdgeInsetsMake(10, 0, 10, 0))
|
||
```
|
||
|
||
## Learn to prioritize
|
||
|
||
> `.prority` allows you to specify an exact priority
|
||
|
||
> `.priorityHigh` equivalent to **UILayoutPriority.DefaultHigh**
|
||
|
||
> `.priorityMedium` is half way between high and low
|
||
|
||
> `.priorityLow` equivalent to **UILayoutPriority.DefaultLow**
|
||
|
||
Priorities are can be tacked on to the end of a constraint chain like so:
|
||
```swift
|
||
make.left.greaterThanOrEqualTo(label.snp_left).with.priorityLow();
|
||
|
||
make.top.equalTo(label.snp_top).with.priority(600);
|
||
```
|
||
|
||
## Composition, composition, composition
|
||
|
||
Snappy also gives you a few convenience methods which create multiple constraints at the same time.
|
||
|
||
#### edges
|
||
|
||
```swift
|
||
// make top, left, bottom, right equal view2
|
||
make.edges.equalTo(view2);
|
||
|
||
// make top = superview.top + 5, left = superview.left + 10,
|
||
// bottom = superview.bottom - 15, right = superview.right - 20
|
||
make.edges.equalTo(superview).insets(UIEdgeInsetsMake(5, 10, 15, 20))
|
||
```
|
||
|
||
#### size
|
||
|
||
```swift
|
||
// make width and height greater than or equal to titleLabel
|
||
make.size.greaterThanOrEqualTo(titleLabel)
|
||
|
||
// make width = superview.width + 100, height = superview.height - 50
|
||
make.size.equalTo(superview).offset(CGSizeMake(100, -50))
|
||
```
|
||
|
||
#### center
|
||
|
||
```swift
|
||
// make centerX and centerY = button1
|
||
make.center.equalTo(button1)
|
||
|
||
// make centerX = superview.centerX - 5, centerY = superview.centerY + 10
|
||
make.center.equalTo(superview).offset(CGPointMake(-5, 10))
|
||
```
|
||
|
||
You can chain view attributes for increased readability:
|
||
|
||
```swift
|
||
// All edges but the top should equal those of the superview
|
||
make.left.right.and.bottom.equalTo(superview)
|
||
make.top.equalTo(otherView)
|
||
```
|
||
|
||
## Hold on for dear life
|
||
|
||
Sometimes you need modify existing constraints in order to animate or remove/replace constraints.
|
||
In Snappy there are a few different approaches to updating constraints.
|
||
|
||
#### 1. References
|
||
You can hold on to a reference of a particular constraint by assigning the result of a constraint make expression to a local variable or a class property.
|
||
You could also reference multiple constraints by storing them away in an array.
|
||
|
||
```swift
|
||
|
||
var topConstraint: Constraint? = nil
|
||
|
||
...
|
||
|
||
// when making constraints
|
||
view1.snp_makeConstraints { make in
|
||
self.topConstraint = make.top.equalTo(superview).with.offset(padding.top)
|
||
make.left.equalTo(superview).with.offset(padding.left)
|
||
}
|
||
|
||
...
|
||
// then later you can call
|
||
self.topConstraint.uninstall()
|
||
```
|
||
|
||
### 2. snp_remakeConstraints
|
||
|
||
`snp_remakeConstraints` is similar to `snp_makeConstraints`, but will first remove all existing constraints installed by Snappy.
|
||
|
||
```swift
|
||
func changeButtonPosition() {
|
||
self.button.snp_remakeConstraints { make in
|
||
make.size.equalTo(self.buttonSize)
|
||
|
||
if topLeft {
|
||
make.top.left.equalTo(10)
|
||
} else {
|
||
make.bottom.equalTo(self.view).offset(-10)
|
||
make.right.equalTo(self.view).offset(-10)
|
||
}
|
||
}
|
||
}
|
||
```
|
||
|
||
## TODO
|
||
|
||
* Eye candy
|
||
* Example projects
|
||
* Tests
|